- Experience the comfort of warm, dry towels each morning, putting an end to the unpleasant damp odours that can linger on towels.
- Multiflex wiring provides connection points on both sides of the rail, allowing the lead to be connected to either side for added convenience and adaptability.
- Hardwired or Plug in for convenient option
- As a versatile dry electric element rail, it can be installed in any orientation, allowing wiring connections from any of the four mounting points for maximum flexibility and convenience.
- Bold square look
- Gorgeous polished stainless steel finish
- 600mm wide x 420mm high x 120mm deep
- With a timer, conveniently schedule your towel ladder to provide warm towels for your shower and turn off when not needed, promoting energy efficiency.
- As low as $1 per week to run
Heated Towel Rails are an affordable luxury for every bathroom for warming and drying your towels.
The SS40M Heated Towel Rail is a 600x420 4 bar rail ideally sized to fit one to two towels.
The SS40M towel heater features multiflex wiring. This means that you have a connection point on the right or left hand side of the rail, this would be typically at the bottom but the rail can be flipped so that it is at the top and provides the option of hardwired or plugin, all as standard out of the box.
The electric towel rail is designed to rapidly heat up and reach a temperature of around 45-55 degrees. The rail can be operated using an on/off switch however we recommend using a timer to allow you to set and forget and control your running costs. As the rail is electric it is very energy efficient and can cost as little as a $1 a week to run.
- Output: 47 Watts
- IP Rating: IP55
- Warranty: 10 years
- Lead Length: 1.8m
- Voltage: 240v
- Number of Bars: 4
- Wiring Type: Multiflex - Concealed (hardwired) or Exposed (plug in)
- Wiring Position: Any of four mounting positions
- Distance Between Mounting Points (Top to bottom): 220mm
- Distance Between Mounting Points (Left to Right): 570mm